Call for Price!

Sanuril Model 100
[Sanuril100]

Sanuril Model 100
The Sanuril Tablet Feeder Model 100 is a complete one-piece chlorination system designed for disinfecting the total flow of treated wastewater from any sewage treatment plant with a daily capacity of up to 10,000 gallons and a peak flow rate of 6.94 GPM.

The Model 100 Tablet Feeder has no moving parts. It is manufactured of low linear, medium density, UV stabilized rotomolded polyethylene for durability and resistance to corrosion. Each unit is equipped with two removable PVC feed tubes in which the SANURIL tablets are contained. The tubes are inserted down through the removable top cover of the feeder into the stream of wastewater. The lower end of each tube is slotted to permit free flow of water through the tubes to assure good contact between the water and disinfectant tablets. A baffle is installed at the inlet end and the outlet end is equipped with a fixed one-inch v-notch weir for proper water velocity and flow.

The entire Model 100 assembly is compact and is easy to handle. Overall it measures approximately 21 inches long, 9-1/2 inches wide and 8 inches deep. The feed tubes are 24 inches long and have an outside diameter of 3-1/2 inches. Each tube holds approximately 29 Sanuril tablets; each tablet 2-5/8 inches in diameter and 13/16 of an inch in thickness.


Superior Performance at a Lower Cost

Better Performance - The entire plant flow passes through the chlorinator, where a thorough mixing of wastewater with a controlled amount of chlorine takes place. This means more effective bactericidal action and less bacteria regrowth.

Low Initial Cost - In addition to low investment in the Chlorinator, savings are compounded because no pumps, mixing tanks or costly control devices are required as with most other chlorination systems.

Simple, Low-Cost Installation - One-piece chlorinator construction requires only inlet piping. No electrical power, wiring, bypasses or other piping is required.

Lower Operating Costs - Chlorinator operates up to 60 days on a single charge of chlorine tablets. No time-consuming premixing of chemicals or costly cylinder handling. Recharging SANURIL 115 tablets is quick and easy. No costs for electrical power or auxiliary power.

Maintenance-Free Operation - No tanks, pumps, cylinders, external control devices or other moving parts to break down. The system is non-mechanical and rust and corrosion proof.

Customers who bought this product also purchased
Sanuril Model 1000
Sanuril Model 1000
We Accept
1 x O-Ring for Sunlight Systems SL160
1 x Wiper Nut for Sunlight Systems SL160
1 x Norweco Model AT 1500 Ultraviolet Disinfection System
1 x End Plug Assembly
1 x Wiper O-Ring
1 x O-Ring for Q-020833
1 x Wiper Blade for Sunlight Systems SL160
1 x Norweco AT1500 UV Power Cable with Female Connector
1 x O-Ring
1 x Compression Nut
1 x QZ0640 68" Quartz Sleeve
1 x QZ0235 17.5" Quartz Sleeve
1 x Q-020833 35-1/2" Quartz Sleeve Domed End
1 x QZ0560 19" Quartz Sleeve
1 x QZ0285 35-1/2" Quartz Sleeve
1 x QZ0115 14-7/8" Quartz Sleeve
1 x QZ0165 16" Quartz Sleeve
1 x QZ0565 36" Quartz Sleeve
1 x QZ0365 19" Quartz Sleeve
1 x QZ0280 33.25" Quartz Sleeve
1 x Norweco AT1500 UV Quartz Sleeve with Teflon Coating
1 x QZ0475 28" Quartz Sleeve
1 x QZ0125 35-1/8" Quartz Sleeve
1 x QZ0205 32-3/4" Quartz Sleeve
1 x QZ0170 36" Quartz Sleeve
1 x QZ0145 64" Quartz Sleeve
1 x LP4260 18" Ultraviolet Lamp, 4 Pin Flat
1 x LP4420 33" HO Ultraviolet Lamp, 4 Pin Flat
1 x LP4055 33.2" Ozone Ultraviolet Lamp, 4 Pin Flat
1 x LP4150 11.29" Ultraviolet Lamp, Mini Bi-Pins Each End
1 x LP4115 14" Ultraviolet Lamp, 2/2 Pin Step
1 x LP4130 11.29" Ultraviolet Lamp, 1 Pin Each End
1 x GPH450 17.72" OZone Ultraviolet Lamp, 4 Pin Flat
1 x LP4185 22" Ultraviolet Lamp, 1 Pin Each End
1 x LP4050 33.2" Ultraviolet Lamp, 4 Pin Flat
1 x LP4825 17" Ultraviolet Lamp, 3-1 Step
1 x LP4390 61.2" HO Ultraviolet Lamp, 3-1 Step
1 x LP4305 31.88" Ultraviolet Lamp, 4 Pin Flat
1 x LP4020 61.2" Ultraviolet Lamp, 4 Pin Flat
1 x LP4945 60" Amalgam Ultraviolet Lamp, 4 Pin Flat
1 x LP4085 25.5" Ozone Ultraviolet Lamp, 4 Pin Flat
1 x LP4775 33" Amalgam Ultraviolet Lamp, 3-1 Step
1 x LP4440 61.2" HO Ultraviolet Lamp, 3-1 Step
1 x LP4060 33.2" Ultraviolet Lamp, 2/2 Pin Step
1 x LP4695 31.88" Ultraviolet Lamp, 3-1 Step
1 x Norweco AT1500 UV Lamp
1 x LP4105 14.25" Ultraviolet Lamp, 4 Pin Flat
1 x LP4165 14" Ultraviolet Lamp, 1 Pin Each End
1 x LP4395 33.2" Ultraviolet Lamp, 3-1 Step
1 x LP4110 14.25" Ozone Ultraviolet Lamp, 4 Pin Flat
1 x LP4090 18" Ozone Ultraviolet Lamp, 4 Pin Flat
1 x LP4040 33.2" Ultraviolet Lamp, 1 Pin Each End
1 x LP4095 17" Ultraviolet Lamp, Mini Bi-Pins Each End
1 x LP4030 61.2" Ultraviolet Lamp, 2/2 Pin Step
1 x LP4155 6.75" Ultraviolet Lamp, 4 Pin Flat
1 x LP4435 33.2" HO Ultraviolet Lamp, 3-1 Step
1 x LP4290 17" Ultraviolet Lamp, 4 Pin Flat
1 x LP4425 14.25" HO Ultraviolet Lamp, 4 Pin Flat
1 x 5H/5M/5L - 5" Series R - Repair Gear Kit
1 x 8H/8M/8L - 8" Series P - Repair Gear Kit
1 x 6H/6M/6L - 6" Series P - Repair Gear Kit
1 x 2M/2L - 2" Series P - Repair Gear Kit
1 x Medium-Wide Fiberglass Blower Enclosure Noise Suppression Adder
1 x Medium-Wide Fiberglass Blower Enclosure Model TS-FIB-MW
1 x Fiberglass Enclosure Exhaust Fan Installed Adder
1 x Small Fiberglass Blower Enclosure Model TS-FIB-S
1 x Large Fiberglass Blower Enclosure Model TS-FIB-L
1 x Small Fiberglass Blower Enclosure Noise Suppression Adder
1 x Medium Fiberglass Blower Enclosure Model TS-FIB-M
1 x URAI47/4L 7.5HP Fiberglass Aeration Blower 180CFM/5PSI
1 x URAI45/4M 7.5HP Fiberglass Aeration Blower 205CFM/5PSI
1 x URAI56/5M 10HP Fiberglass Aeration Blower 270CFM/5PSI
1 x URAI33/3M 5HP Fiberglass Aeration Blower 130CFM/5PSI
1 x URAI47/4L 10HP Fiberglass Aeration Blower 265CFM/5PSI
1 x URAI22/2M 1.5HP Fiberglass Aeration Blower 29CFM/5PSI
1 x URAI59/5L 15HP Fiberglass Aeration Blower 405CFM/5PSI
$59,692.75
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search